CA Drinking Water Watch

Links

Water System Details

Water System Facilities  

Monitoring Schedules

Monitoring Results

Monitoring Results By Analyte

Lead And Copper Sampling

Violations/Enforcement Actions

Site Visits

Consumer Confidence Reports

  • 2019
  • 2018
  • 2017
  • 2016
  • 2015

Return Links

Water System Search

County Map

Glossary

Contact Info

 

 

Monitoring Schedules

(This page will be replaced by the new format monitoring schedule page by July 15, 2020)

Water System No. : CA3410033 Federal Type : C
Water System Name : FLORIN COUNTY WATER DISTRICT State Type : C
Principal County Served : SACRAMENTO Primary Source : GW
Status : A Activity Date : 01-01-1976
Distribution System Classification : D2 Max Treatment Plant Classification : T1

The Division of Drinking Water's (DDW's) drinking water quality monitoring schedules identify upcoming required testing of drinking water for water systems in California. These documents should not be used for determining whether water systems are in compliance with monitoring requirements. The purpose for providing these monitoring schedules is to allow water systems to verify that their sampling and analyses have been incorporated into the DDW database and to identify upcoming required monitoring/sampling events.

Notes for Water Systems:
1. The monitoring notification documents should be considered "draft," in that they will change with subsequent updates, and as monitoring data are submitted, or as monitoring schedules are revised .
2. The monitoring notification documents are derived from the DDW Water Quality database and from schedules maintained by DDW districts.
3. If your upcoming monitoring or your data identified as "DUE" are not in agreement with this document, or if your have been advised of any increased monitoring that is not reflected in the report for a particular source, please contact your District Engineer or LPA representative. For a map of the districts, please click here.
4. If your notification report for a source is blank, this does not necessarily indicate compliance with all monitoring requirements.
5. These notification reports may not reflect compliance with initial monitoring for newly regulated constituents, or constituents that require special monitoring frequencies. For example, the DDW database is unable to accurately forecast the vulnerable non-volatile synthetic organic chemical (SOC) frequency for large water systems serving over 3,300 people of 2 quarters every 3 years.
5a. For radionuclide compliance monitoring, a gross alpha (GA) particle activity measurement may be substituted for other measurements when the assigned value is less than 5 pCi/L. The assigned value is calculated by adding 0.84 of the counting error (CE) to the gross alpha result (GA + 0.84xCE). If the assigned value is greater than 5 pCi/L, then the water sample must be analyzed for uranium per Section 64442, Article 5, Chapter 15, Division 4, Title 22 of the California Code of Regulations. In addition, if the difference between the assigned value and the uranium measurement [GA + (0.84 x CE) - U] is greater than 5 pCi/L, analysis for Radium-226 and Radium-228 is required. If you have specific questions, contact your DDW District Office.
6. Some Nitrate (as N) results under storet code 00618, will have a result of ‘N/A’ which stands for ‘Not Applicable.’ This stems from the change in regulation requiring that all nitrate sampling be reported as Nitrate (as N) starting January 1, 2016. Prior nitrate sampling was reported as Nitrate (as NO3). With this change in nitrate reporting requirements, the monitoring schedules have captured the last date of Nitrate (as NO3) sampling and applied it to Nitrate (as N) in determining the next due date [unless there have been Nitrate (as N) samples collected]. The Nitrate (as NO3) result, however, does not carry over to Nitrate (as N) which is why there may be a notation in the ‘Constituent Identification’ column to reference storet code 71850 for the last nitrate result. In these instances, the ‘Constituent Identification’ column will say, “NITRATE (as N) – [see 71850].” Any questions should be referred to your District Engineer.  

Monitoring Schedules for All Sampling Points Except Lead and Copper
Please click on the above link to view schedules of all sampling points (except lead and copper).

Monitoring Schedule for Individual Sampling Points
Please click on a PS Code below to view the monitoring schedule associated with it.
PS Code = Primary Station Code; used by laboratories to upload water quality data
WQM PS Code = (Water System Number)-(Sample Point ID)
CLIP PS Code* = (Water System Number)-(Facility ID)-(Sampling Point ID)
 
Click here to bring back the list of sampling points.


Water System Sampling Points
WQM PS Codes CLIP PS Codes* Facility ID Sample Point ID Sample Point Name Type
3410033-001 3410033-001-001 001 001 DIANA WAY WELL RW
3410033-002 3410033-002-002 002 002 FLETCHER FARMS WELL RW
3410033-003 3410033-003-003 003 003 FLORIN ROAD WELL RW
3410033-004 3410033-004-004 004 004 FRENCH ROAD WELL RW
3410033-006 3410033-006-006 006 006 KARA WELL RW
3410033-007 3410033-007-007 007 007 MCCOMBER WELL RW
3410033-008 3410033-008-008 008 008 POWER INN WELL RW
3410033-009 3410033-009-009 009 009 REESE WELL RW
3410033-010 3410033-010-010 010 010 REESE WELL 02 RW
3410033-011 3410033-011-011 011 011 DIANA WAY WELL - TREATED WS
3410033-012 3410033-012-012 012 012 WEYAND WELL 10 RW
3410033-013 3410033-013-013 013 013 FLETCHER FARMS WELL - TREATED WS
3410033-014 3410033-014-014 014 014 FLORIN ROAD WELL - TREATED WS
3410033-015 3410033-015-015 015 015 FRENCH ROAD WELL - TREATED WS
3410033-016 3410033-016-016 016 016 KARA WELL - TREATED WS
3410033-017 3410033-017-017 017 017 MCCOMBER WELL - TREATED WS
3410033-018 3410033-018-018 018 018 POWER INN WELL - TREATED WS
3410033-019 3410033-019-019 019 019 REESE WELL - TREATED WS
3410033-020 3410033-020-020 020 020 REESE WELL 02 - TREATED WS
3410033-021 3410033-021-021 021 021 WEYAND WELL - TREATED WS
3410033-022 3410033-022-022 022 022 SACRAMENTO COUNTY INTERTIE WS
3410033-023 3410033-023-023 023 023 CALAM - PARKWAY INTERTIE WS
3410033-024 3410033-024-024 024 024 CALAM - PARKWAY INTERTIE WS
3410033-LCR 3410033-DST-LCR DST LCR DS
 
*CLIP PS Code = PS Code to be used by laboratories to upload water quality data when CLIP (California Laboratory Intake Portal) is implemented; estimated launch date mid- to late-2020.