CA Drinking Water Watch

Links

PS Code Transition

Water System Details

Water System Facilities  

Monitoring Schedules

Monitoring Results

Monitoring Results By Analyte

Lead And Copper Sampling

Violations/Enforcement Actions

Site Visits

Consumer Confidence Reports

  • 2020

Lead Service Line Documents

Return Links

Water System Search

County Map

Glossary

Contact Info

 

 

PS Code Transition


Water System No. : CA1410500 Federal Type : NC
Water System Name : NPS - DEATH VALLEY, MESQUITE SPRINGS State Type : NC
Principal County Served : INYO Primary Source : GW
Status : A Activity Date : 01-01-1976
Distribution System Classification : NR Max Treatment Plant Classification : TD

Notes:
  • PS Code = Primary Station Code; used by laboratories to upload water quality data
  • Old PS Code = (Water System Number)-(Sample Point ID)
  • New PS Code = (Water System Number)_(Facility ID)_(Sampling Point ID) to be used by laboratories to upload water quality data when CLIP (California Laboratory Intake Portal) is implemented
  • Facility Status: A = Active; P = Proposed
  • Certain PS Codes have been removed from this table as they are not intended to have water quality data electronically reported. As an example, a water system may have a PS Code to represent Well 01 and another PS Code to represent Well 01 Chlorination. However, water quality data should only be reported to the PS Code for Well 01. The PS Code for Well 01 Chlorination would be removed from the list to avoid confusion in uploading data. If you notice that a PS Code is missing from the list that may be needed for uploading water quality data, please contact your District Office or Local County Primacy Agency.

Click to hide / show columns: Old PS Code | New PS Code | Status | Sample Point Name


Water System Sample Points
Old PS Code New PS Code Status Sample Point Name
1410500-001 CA1410500_001_001 A MESQUITE SPRING
1410500-800 CA1410500_800_800 A MESQUITE SPRING - TREATED (CL2)
Old PS Code New PS Code Status Sample Point Name
 
*Please refer to the Stage 2 DBP Monitoring Plan Approval Letter for full sample point names.
**Please use this PS Code for all lead and copper samples.